4×2 ISUZU roll off garbage truck

ISUZU roll off garbage truck named ISUZU arm roll garabge truck,ISUZU skip loading garbage truck,ISUZU skip loader container garbage vehicle,ISUZU hook lift garbage truck,hook loader trash truck,hook lifting waste car,hook hydraulic roll container rubbish vehicle .

ISUZU skip loading garbage truck Consist

It consists of hydraulic system and operating system. Lifting oil cylinder (1) is a double-acting oil cylinder produced by a well-known domestic hydraulic parts manufacturer.

The garbage box can be lifted and put down by itself, and the garbage can be dumped by itself. The next working cycle time is less than or equal to 50S.

The feature of the car is that one car can be equipped with multiple garbage compartments, and it can realize the joint operation of one car and multiple garbage compartments, and cyclic transportation, which fully improves the transportation capacity of the vehicle.

1. ISUZU hook loading garbage truck information

ISUZU hook lift garbage truck baby frame

The attached baby frame of the detachable pull arm garbage truck is made of No. 16 low-alloy channel steel, No. 20 square tube and 8mm, 5mm, 4mm, 16Mn steel plates welded.

The action design of the overturn frame and the movable pull arm garbage truck is reasonable and reliable. , to realize the simple and convenient operation of pulling the box, locking, placing the box and self-unloading.

When the pull-arm garbage truck box is pulled to the attached frame, there are lateral guide blocks for positioning and locking hooks for locking and positioning.

When the pull-arm garbage truck is running, there is no skew phenomenon, which is safe and reliable.

There is a water tank at the front end of the attached frame, which is convenient for the operator to clean up the dirt in time and keep it clean and tidy.

ISUZU skip loader garbage truck bin

The bin body of the pull arm garbage truck is welded with No. 10 low-alloy channel steel, No. 16 square tube and 12mm, 8mm, 5mm, 4mm steel plates, etc.

At the same time, the box body is an integral sealed structure to prevent secondary pollution when the box body moves.

ISUZU roll off garbage truck hydraulic system

The action of the hydraulic cylinder of the pull arm garbage truck is controlled by a manual hydraulic multi-way valve, and the hydraulic multi-way valve controls the action of the oil cylinder.

Simple and reliable operation and easy maintenance.

The hydraulic system of the pull arm garbage truck is composed of an oil tank and a filter system, an oil pump, a multi-way reversing valve, a one-way throttle valve, an oil cylinder, and an oil pipe.

The power of the system comes from the engine, and the power is separated through the power take-off, which drives the gear pump to work.

The pull arm garbage truck gear pump sucks the hydraulic oil in the hydraulic oil tank through the oil suction filter, and the multi-way valve (located behind the cab and in the front of the car box) supplies oil. When the multi-way valve of the pulling arm garbage truck is working, the pulling arm oil cylinder and the locking oil cylinder are activated.

When the hydraulic oil cylinder is not working, the hydraulic oil is directly returned to the oil tank through the multi-way valve.

Question of the ISUZU hook rubbish truck 

How the garbage loading into the ISUZU sanitation truck ?

The rear filling system has one auto garbage bin ,it can filling garbage directly .

How the waste thing transport well?

Our garbage bins has good sealed for it .

How much does a ISUZU sanitation truck cost ?

It is according your  garbage  truck size .

What kind of garbage will be loaded?

Construction waste and life waste all ok .

Where has rubbish? where has our ISUZU container loading garbage truck !

Call us now !0086-18727992788