4×2 5000Liters ISUZU sewage suction truck
ISUZU sewage suction truck named ISUZU Vacuum Suction Truck,ISUZU sewage tanker truck, ISUZU vacuum suction truck, ISUZU Septic Tank Suction Truck, Sludge Cleaning Truck.
ISUZU Sewage suck tanker truck is a new type of sanitation vehicle that collects, transfers, cleans and transports sludge and sewage, and avoids secondary pollution. Liquid substances such as crude oil.
The sewage suction truck adopts the domestic technology-leading vacuum pump of the sewage suction truck, which has a large suction force and a long suction distance. It is especially suitable for the suction, shipment and discharge of the sludge in the sewers, especially the sewage sludge, silt, stones and bricks. larger objects such as blocks.
specific of the protable sewer suction truck
Truck model | ISUZU | |
Model | QL1100TKARY | |
Vehicle size | (mm) | 5900×2000×2350 |
Engine | Model | Euro 3 engine |
Power | 75 | |
Horse power | 96HP | |
More tanker equipment | Oily water separator, air water separator, special vacuum excrement suction pump, pressure volume gauge, pipeline system, the sucking tube, flow valve, vacuum tank,
a communicating device (as the dung window), automatic anti-overflow valve these parts |
|
Tanker | Sewer tanker is 4000Liters
Water tanker is 1000liters |
|
Vacuum pump | Vane rotor pump with 4-way-value | |
Suction tube diameter | 108mm | |
High pressure water pump | Bentian brand | |
assembly | Oil-water separator,
gas-water separator, Hydraulic self-unloading device, Special vacuum suction pump, Pressure volume table, Pipe network system, Aspiration catheter, Gravity valve, Vacuum tank,Connector ( depending on the dung window ), automatic anti-overflow valve, |
Structure of the ISUZU suction sewer truck
- details of the ISUZU suction sewer truck
Advantage of the ISUZU sewage suction truck
First: vacuum pump accessories for sewage suction trucks: oil-water separator
The hydraulic oil separated by the oil-water separator of the sewage suction truck is re-used as the lubricating oil for the vacuum pump of the sewage suction truck, but the separated water will be stored at the bottom of the tank, so the sewage suction truck must be drained after the work is completed.
Causes problems such as sintering, and the hydraulic oil is used for too long, which will reduce the smoothness and air tightness. Therefore, the sewage suction truck should replace the hydraulic oil on time.
Second: anti-overflow valve of sewage suction truck The anti-overflow valve of the sewage suction truck is installed to prevent the sewage from overflowing into the vacuum pump of the sewage suction truck when the tank is full.
The vacuum pump of the sewage suction truck sucks more sludge, which is easy to damage the vacuum pump. Therefore, when the sewage suction truck is working, it is necessary to check the quality of the anti-overflow valve frequently.
Third: the rear tank door of the sewage suction truck After the tank door is clamped and installed at the rear of the sewage suction truck for a long time, there will be dirt inside, and the handwheel should not be tightened.
Therefore, the interior should be divided and cleaned every 6 months, and the lubricating grease should be properly added at this time. It is best to clean the sealing rubber ring of the rear tank door after the sewage suction truck works.
If there is any leakage, if there is no problem with checking the tightening device, it is necessary to replace the sealing rubber ring of the rear tank door of the sewage suction truck. The rear tank door of the sewage suction truck is sealed. If the rubber ring is used for a long time, the sealing performance may decrease.
welcome you come to china and visit our factory to inspect ISUZU sewage tank truck.
Contact us now:0086-18727992788
Adan –
Hi how many litters